| Light steel structure workshop refers to the main load-bearing component is composed of steel. Including steel columns, steel beams, steel base, sandwich pannel, roof, windows and doors. |
| |
|
|
| 1 |
Steel Structure Parts (Q235 or Q345) Hot galvanized or painted. |
(1). Steel Column: H Section Steel |
| (2). Steel Beam: H Section Steel |
| (3). Withstand Wind Column: H Section Steel |
| (4). Connected beam: Circular Tube |
| (5). Roof Purline: cold formed galvanized C Section |
| |
| Steel or Z Section Steel |
| (6). Wall purline: cold formed galvanized C Section Steel |
| or Z Section Steel |
| (7). End Wall purline: C Section Steel or Z Section Steel |
| 2 |
Panel Material parts |
(1). External Wall panel: (below is selectable) |
| 1) 50mm, 75mm or 100mm thickness EPS sandwich panel |
| 2) 50mm, 75mm or 100mm thickness Rockwool sandwich |
| panel |
| 3) 900# Corrugated Galvanized Steel sheet with different Color |
| 4) Kinds of PVC wall panel. |
| (2). Internal Wall panel: (below is selectable) |
| 1)50mm, 75mm or 100mm thickness EPS sandwich panel |
| 2) 50mm, 75mm or 100mm thickness Rockwool sandwich |
| panel |
| (3). Roofing panel: (below is selectable) |
| 1)50mm, 75mm or 100mm thickness EPS sandwich panel |
| 2)50mm, 75mm or 100mm thickness Rockwool sandwich |
| panel |
| 3)Corrugated Steel Sheet, and insulating layer if need. |
| 4)Corrugated PVC roof panel. |
| (4). Skylight: 820# Glass Fiber Reinforced Plastics (FRP) |
| 3 |
Door and Window |
(1). External Door ( Rolled up door or Sliding door ) |
| -1. Over-heat Orbit Sliding Door with double open |
| -2. Galvanized steel opening by power-operated Roller Door |
| (2). Internal Door: |
| 50mm Thickness EPS sandwich panel with aluminum alloy |
| |
| door frame |
| (3). Window: |
| PVC Window or aluminum alloy window frame with glass. |
| 4 |
Drainage parts |
(1).Galvanized water channel: |
| 2mm thickness galvanized steel water channel |
| |
| @ 3000mm or 2440mm/pcs |
| (2). Down spout: ∅110 PVC Down spout with Accessorie |
| 5 |
Connecting Piece |
(1) Purline draw bar: ∅12 |
| (2) Horizontal Bracing: ∅24 Circular Tube |
| (3) Knee-Bracing: L Steel |
| (4) Purline Drive pipe: Φ32*2 |
| (5) Column Bracing: ∅24 Circular Tube |
| 6 |
Others |
(1) Ventilating device |
| (2) Crane beam |
| (3) Canopy |
| (4) Bolt: Foundation bolt, High strengthen bolt, Normal bolts. |
